- ページ 8
自動車アクセサリー Directed DB3 403.KIA8のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Directed DB3 403.KIA8 20 ページ。 2020 kia forte5 (smart key)
ページを印刷する
Vehicle connections
The connection information listed below is specific to the 2020 Kia Forte5 (Smart Key). Refer to "Pre-installation and application warnings" for a list of important notes.
Data 14-pin blue connector (H1)
Module
Conn./Pin
Color
H1/1
Light Green
H1/2
Violet/Yellow
H1/3
Tan/Black
H1/4
Tan
H1/5
Orange/Green
H1/6
Orange/Brown
H1/7
Brown
H1/8
Yellow
H1/9
Orange/Yellow
H1/10
Orange/Red
H1/11
Yellow/Red
H1/12
Brown/Red
H1/13
Red
H1/14
Black
Output 12-pin red connector (H2)
Module
Conn./Pin
Color
H2/1
Black/White
H2/2
Green/Black
H2/3
Green/White
H2/4
Red/Black
H2/5
Violet/White
H2/6
Gray
H2/7
Gray/Black
H2/8
Violet/Green
H2/9
Violet/Brown
H2/10
Yellow/Black
H2/11
Orange/Black
H2/12
Blue/Red
8
403.KIA8 1.07 2020 Kia Forte5 (Smart Key)
©2022 VOXX•DEI LLC. All rights reserved.
Description
No Connection
No Connection
HS CAN 3 High
HS CAN 3 Low
HS CAN 2 High
HS CAN 2 Low
Relay 1 N.O. - No Connection
Relay 1 COM -Ignition Interr. (conn. side)
Relay 1 N.C. - Ignition Interr. (veh. side)
Relay 2 N.C. - Immo. Data Interr. (veh. side)
Relay 2 COM - Immo. Data Interr. (conn. side)
[3]
Relay 2 N.O. - 12V Input
W2W Only - (+) 12 Volt
W2W Only - (-) Ground
Description
No Connection
(-) PTS 1 Output
W2W Only – (-) Door Status Output
(-) PTS 2 Output
[2]
W2W Only – (AC) Tach Output
No Connection
No Connection
No Connection
(MUX) Parking Light Output
No Connection
Immo. Data (conn. side)
W2W Only – (-) Hood Status Output
Connects To
Wire Location
No Connection
No Connection
ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (G), pin 12
ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (G), pin 11
ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (G), pin 16
ICU Junction Block-Dash Fuse Box, rear, white 32 pin plug (G), pin 15
No Connection
ICU Junction Block-Dash Fuse Box, rear, white 54 pin plug (E), pin 40
ICU Junction Block-Dash Fuse Box, rear, white 54 pin plug (E), pin 40
Driver Kick, red 68 pin plug (EM11), pin 11
Driver Kick, red 68 pin plug (EM11), pin 11
ICU Junction Block-Dash Fuse Box, black 4 pin plug (A), pin 3
5K - 10K Resistor
Remote Starter
Remote Starter
Connects To
Wire Location
No Connection
Start Stop Button Switch, gray 10 pin plug, pin 9
Remote Starter
Start Stop Button Switch, gray 10 pin plug, pin 10
Remote Starter
Tach wire is an optional connection required on some remote starters, which
do not support a tach signal in D2D.
No Connection
No Connection
No Connection
Headlight-Wiper Switch, black 16 pin plug, pin 14
No Connection
Driver Kick, red 68 pin plug (EM11), pin 11
Remote Starter
(+/-)
Wire Color
Data
Yellow (P-CAN)
Data
Blue (P-CAN)
Data
White (B-CAN)
Data
Brown (B-CAN)
Cut
Pink
Cut
Pink
Data
Brown/Orange
Data
Brown/Orange
+
Blue (60A)
(+/-)
Wire Color
-
Yellow/Black
-
Yellow/Orange
MUX
Blue
Data
Brown/Orange