- ページ 12

トランスデューサー Clark Synthesis TST239のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Clark Synthesis TST239 20 ページ。 Platinum, gold, silver and all weather transducers
Clark Synthesis TST239 にも：補足マニュアル (4 ページ), インストレーション・マニュアル (8 ページ), データシート (1 ページ), バイヤーズ・マニュアル (2 ページ), 仕様 (1 ページ), インストレーション・マニュアル (20 ページ)

Installation: Wood Decks

Measure the overall dimensions of the deck. For best results, it is recommended that one (1) AW339

be installed for every 10 ft. by 10 ft. (3 m by 3 m) section of deck. For example, if you have a deck that

is 10 ft. by 20 ft. (3 m by 6 m), you would need to install two (2) AW339 transducers on that deck.

The transducer should be mounted in a location that is equally spaced from the sides of the deck and

other transducers. As general examples, the diagrams below provide top views of 10 ft. by 10 ft. (3 m

by 3 m) and 10 ft. by 20 ft. (3 m by 6 m) deck surfaces with the transducers mounted equal distances

from each other and from the edges of the deck.

If the deck is a custom shape, approximate the placement of the transducers using the general

recommendation of one transducer for every 100 ft.

10 ft. (3 m)

5 ft.

(1.5 m)

Transducer

When determining the actual mounting location(s), it is important to decide which type of mounting

style you want to use. There are two commonly used mounting styles: the joist mount or the bridge

mount. See the diagrams of each style below.

Tactile Sound Transducers

5 ft.

(1.5 m)

Joist Mount

Bridge Mount

Arched Bridge

(9 m

20 ft. (6 m)

Transducers

6.7 ft.

(2.05 m)

Minumum 3/4" (1.9 cm) Thick

Joist

Drill 5/16" (.79 cm) Hole

3/8"- 16 Hanger Bolt

Jam Nut

3" (7.6 cm)

5-1/2" (14 cm)

Jam Nut

6.7 ft.

(2.05 m)

Tip: Tighten two Jam

Nuts against each other

to screw in the Hanger

Bolt with a wrench.

Straight Bridge