- ページ 8
レーダー探知機 Clark Systems MVD1001のPDF ハンドブック＆インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Clark Systems MVD1001 10 ページ。 Radar vehicle detector mvd1000 series
ページを印刷するConnections
The detector is supplied with a 1m cable optionally terminated in Bulgin Buccaneer Series
PX0728/P 9 pole, weatherproof connector. Connections are given in Table 4.
Commissioning
Ensure supply voltage and other connections are correct prior to connecting detector.
When the detector has been installed and is powered, observe actuations on the LED as
vehicles move within the required detection zone. Make pan adjustments as required to
ensure detection of vehicles within the detection zone and minimize masking signals from
vehicles outside the required detection zone. Changes to Range or Mode are best done
prior to mounting but can be done in-situ provided no water ingress will occur whilst the
access plugs are removed (i.e. it is not raining!). Ensure plugs are fully tightened before
leaving site. Ensure the detector is connected to the appropriate phase of the controller!
Problem Sites.
In most instances the detector will operate correctly. However there are sites where
problems may be encountered. Often this is due to reflections from metal structures or
moving objects. These include metal fences (e.g. chain link, corrugated sheet etc) and
similar objects near the detector. Pedestrian activity can also cause problems, particularly
where a low threshold speed has been selected. All radio frequency detectors suffer from
these and similar problems. Clark Systems' detectors are designed to provide substantial
immunity from these problems, but in common with all detectors, detection cannot always
be guaranteed. Please consult supplier in the event of problems being encountered in the
field.
Repair & Maintenance
No maintenance is required other than the occasional cleaning of the Radome. A mild
detergent may be used.
There are no field maintainable components - return module to supplier for
repair/replacement. Any attempt to open or modify this equipment will invalidate its
Approval and render any warranty void.
S00104101MVDHandbook.doc
July 2002
Pin
Circuit
1
Supply
2
3
Earth/ Screen
4
Common
5
Open on Detect
6
Closed on Detect
7
Spare
8
Spare
9
Spare
Table 4 - Connections
Colour
Red
Black
Green/ Screen
White
Yellow
Blue
Violet
Orange
Pink/ Brown
8