- ページ 5
ネットワーク・ハードウェア 3Com SWITCH 4050のPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。3Com SWITCH 4050 12 ページ。 Product guide
3Com SWITCH 4050 にも： データシート (6 ページ), データシート (4 ページ), 製品マニュアル (14 ページ)
ページを印刷する
Operation (Continued)
Bridge Resilient Links Create
Bridge Resilient Links Delete
Bridge Resilient Links Modify
Bridge Resilient Links Summary
Bridge Spanning Tree Setup
Physical Interface Ethernet History History-1 Hour
Physical Interface Ethernet History History-48 Hours
Physical Interface Ethernet Setup
Physical Interface Ethernet Smart Autosensing
Physical Interface Ethernet Statistics
Physical Interface Ethernet Summary
Protocol IP Setup
Protocol IP ARP Aging
Protocol IP ARP Display/Edit
Protocol IP ARP Find
Protocol IP ARP Flush
Protocol IP ARP Statistics
Protocol IP Interface Display/Edit
Protocol IP RIP Display/Edit
Protocol IP RIP Mode
Protocol IP RIP Neighbors
Protocol IP RIP Statistics
Protocol IP Route Default Gateway
Protocol IP Route Display/Edit
Protocol IP Route Find
Protocol IP Route Flush
Protocol IP UDP Helper Display/Edit
Security Device User Modify
Security Network Access AccessList Display/Edit
What does the Operation do?
Creates a resilient link on the unit.
Deletes a resilient link that is configured on the unit.
Sets the main or standby link on a resilient pair as the active
link.
Displays details of all resilient links that are currently
configured on the unit.
Configures spanning tree parameters.
Displays packet activity for all ports on a unit over the previous
hour.
Displays packet activity for all ports on a unit over the previous
48 hours.
Sets up single or multiple Ethernet ports.
Enables or disables smart autosensing for the unit.
Displays statistics for packet and error traffic on one or more
ports.
Displays summary information for the unit.
Configures the IP information for the unit.
Sets the age time for dynamic ARP entries.
Displays the contents of the ARP table.
Finds an ARP entry in the ARP table.
Deletes all dynamic entries from the ARP table.
Displays the ARP statistics.
Displays or edits the interfaces currently configured on the
unit.
Displays or edits the RIP information on an interface.
Enables or disables RIP operation and sets the RIP update
time.
Displays neighbor information.
Displays the RIP interface statistics.
Configures the default gateway.
Displays or edits the current static routes.
Finds an existing route in the routing table.
Removes all learned routes.
Displays or edits the configured UDP Helper Servers.
Modifies the password of the current user.
Displays or edits the configuration settings for the Access List.
5