- ページ 11

カー・ビデオ・システム Caliber RMD 571のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Caliber RMD 571 17 ページ。
Caliber RMD 571 にも：クイック・スタート・マニュアル (8 ページ)

When PTY group is on, press the VOL+ or VOL- button on the remote control

or rotate the VOL knob on the front panel to select one of PTY programs

as follows:

<-->NEWS<-->AFFAIRS<-->INFO<-->SPORT<-->EDUCATE<-->DRAMA

<-->CULTURE <-->SCIENCE<--> VARIED<-->WEATHER<--> FINANCE

<-->CHILDREN<-->SOCIAL<-->RELIGION<-->PHONE IN<-->TRAVEL

<-->LEISURE<-->DOCUMENT< -->PTY NONE<-->POP M< -->ROCK M

<-->EASY M<-->LIGHT M<--> CLASSICS<-->OTHER M

<-->JAZZ<-->COUNTRY<-->NATION M<-->OLDIES<-->FOLK M<-->

When PTY group is on, pressing the 6 number buttons also can select one of

PTY programs as above.

After selecting one of the PTY programs, it will display SEEK PTY and

automatically search for the station of the PTY program. If the station of the

PTY program does not exist, it will display PTY NONE and then return back to

the normal station.

9. AF [ALTERNATIVE FREQUENCIES] BUTTON

When AF button is pressed briefly, the AF switching mode is selected and the

status of the AF switching mode is displayed by AF segment on the display.

Segment off: AF switching mode off.

Segment on: AF switching mode on, and has RDS information.

Segment flashing: AF switching mode on, but RDS information is not

When the AF switching mode is selected, the radio checks the signal strength

of the AF all the time. The interval of checking time of each AFs depends on

the signal strength of the current station, from a few minute for the strong

station to a few seconds for the weak station. Every time when a new AF is

stronger than the current station, it switches over to that frequency for very

short time, and the NEW FREQUENCY is displayed for 1-2 second. Because

the mute time of the AF switching or the checking time is very short, it is almost

inaudible in case of normal program. (When AF flashes on the monitor, it will

search for the stronger RDS station. If AF and TP flash on the monitor, it can

only search for the traffic announcement station).

In FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY functions can

only receive and save the RDS program.

10. TA [TRAFFIC ANNOUNCEMENT] BUTTON

Press the TA button briefly to turn on TA search mode.

When traffic announcement is transmitted:

1).If the unit is in Disc Play mode, it will switch to radio mode temporarily.

2).Temporarily switches over to an station with traffic announcement, and TA,

TP will be displayed on the monitor.

* TA interruption function:

The current traffic announcement is cancelled by pressing TA button briefly.

* When TA is on, SEEK, (SCAN), AUTO MEMORY functions can be received

or saved only when traffic program identification code has been received.

received yet.