- ページ 6

ワークライト Clark-Reliance Jerguson LumaStar EPL-316のPDF 据付・操作・メンテナンス説明書をオンラインで閲覧またはダウンロードできます。Clark-Reliance Jerguson LumaStar EPL-316 12 ページ。
Clark-Reliance Jerguson LumaStar EPL-316 にも：据付・操作・メンテナンス説明書 (12 ページ)

ページを印刷する

Clark-Reliance Jerguson LumaStar EPL-316 据付・操作・メンテナンス説明書

Figure 8

Figure 9

Step 3: While holding the top bracket in place, grab the thumb nut end of the cable, wrap around entire gauge and thread

onto the stud until the bracket is secure. When wrapping the cable around the gauge, make sure to feed the cable above the

bolt as shown above in Figure 5. Snug the cable and secure the thumb nut, but do not fully tighten the thumb nut at this

time.

Figure 10

Step 4: Align bottom bracket, using the 2

bolt if possible. Wrap thumb nut end of the cable around the entire gauge and

begin to thread. Pull the cable loop as tight as possible and fully tighten the thumb nut down as shown in Figure 6. The

lower bracket should now be tight and secure.

16633 Foltz Parkway ● Strongsville, OH 44149 USA ● Telephone: +1 (440) 572-1500 ● Fax: +1 (440) 238-8828