- ページ 8

リモートスターター Directed 2102TのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Directed 2102T 16 ページ。 Directed passive keyless entry system pke

Manual unlocking

Press and hold the

ing lights will flash twice to confirm the doors have been unlocked.

Manual locking

Press and release the

red indicating that the command is being sent, and the parking lights will flash

once to confirm the doors have been locked.

Note: When installed with certain remote starter models, the doors might not

locks when the vehicle is running by the key.

Enabling/Disabling valet mode

Valet mode can be enabled and disabled using the following procedure.

When the feature is enabled, the automatic locking/unlocking operation upon

entering the active zone will be disabled. However, manual locking/unlocking

of the vehicle is possible in valet mode, as long as the ignition is off.

Enable valet mode

Within the active zone, quickly press and release the key fob

then press and hold until the remote LED flashes red to confirm the system has

entered valet mode. The key fob LED will no longer flash to indicate whether

you are in the active zone or not.

Disable valet mode

Within the active zone, quickly press and release the key fob

then press and hold until the remote LED flashes red to confirm the system has

exited valet mode. The key fob LED will flash to indicate whether you are in the

active zone or not.

button until the LED on the remote flashes red. The park-

button for 1 second. The LED on the remote will flash

button twice,