- ページ 11

ソウ ALDI FERREX 704518のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ALDI FERREX 704518 20 ページ。 1010w

Assembly

WARNING: Ensure the product is

disconnected from the mains power

supply before attempting any assembly.

WARNING: To prevent the possibility of

sanding dust or foreign body being

thrown into your face or eyes, never attempt to

use your sander without the dust collection bag

properly installed.

Attaching the dust collection bag

You must use the dust collection bag (12) provided to

collect the dust produced during sanding.

Open the dust collection bag bracket with your hand

and then slide it onto the dust extraction outlet (6) on

the belt sander (Fig. A1). When the dust collection bag

(12) is full, remove and empty by opening the zip on

the dust collection bag (12) (Fig. A2).

NOTE: For more efficient operation, empty the dust

collection bag (12) every 5-10 mins.

WARNING! Always hold your belt sander firmly with both hands

when operating.

For your personal safety it is recommend using the auxiliary handle (1) at all

times.

To adjust the auxiliary handle (1), release the auxiliary handle locking lever

(9) (Fig. B1) and rotate the auxiliary handle (1) up or down to the most

comfortable and balanced position (Fig. B2). Then push in the auxiliary

handle locking lever (9) to the original position to lock the auxiliary handle

(1) (Fig. B3).

AFTER SALES SUPPORT

1300 889 028

(toll free)

1010W Belt Sander

MODEL No.: PBS101.A • 02/2021 • 704518