- ページ 12

リモートスターター Directed AS-1774のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Directed AS-1774 16 ページ。

ページを印刷する

1. Valet Mode

Within 3 seconds, press the

and

The P-lights will flash once

To take the system out of home valet mode:

Turn the ignition key to the IGNITION ON (RUN) position.

The system will warn you if someone attempts to start your vehicle while it stands in home valet

mode. The parking lights will:

Turn ON then OFF; then

Flash twice, pause; then

Flash twice again.

AUX 1

Note: This 500 mA negative Aux 1 output can be used for many different applications

Priority door:

This great feature allows the user to unlock solely the driver's door with a single press of

the

button on the transmitter, and to unlock the other doors, if desired, by pressing

the

button for a second time.

The output will provide a 1-second negative output when the

second time on the transmitter.

Horn Confirmation:

AUX 1 can be programmed to trigger the horn every time the

when the

button is pressed twice within 3 seconds. When horn confirmation is

activated, panic mode is enabled. If horn confirmation is disabled, panic mode will not

be available.

Horn Chirp Timing

The pulse duration can be configured by your installer (from 5 ms to 200 ms).

Multi-car Operation

This option allows the owner of two vehicles, both equipped with the same Remote Car Starter

model, to control both systems with a single remote control. To control the second vehicle,

simultaneously press the TRUNK button and the button of the function you wish to use.

Note: Your remote control must be configured for second car operation by the installer.

Press TRUNK + LOCK buttons simultaneously: .. LOCK

Press TRUNK + UNLOCK simultaneously: .......... UNLOCK

Press TRUNK + START simultaneously: .............. START

Press TRUNK + STOP simultaneously: ................ STOP

Press TRUNK + START simultaneously for 3 sec: Cold Weather Mode

OEM-Style Alarm

The OEM-style alarm (if configured by your installer) monitors the doors, hood and ignition switch

of your vehicle. It will sound the horn if a door or the hood is opened, or if the key is turned in the

ignition.

x To arm the OEM-style alarm, press the

button on the transmitter.

-The OEM-style alarm will ONLY arm if the

-The LED on the antenna will flash slowly to indicate that the OEM-style alarm is now armed.

To disarm the OEM-style alarm, press the

P.12

buttons simultaneously for 3 sec.

button is pressed a

button is pressed, or

button on the transmitter is pressed.

button on the transmitter.

User Guide