- ページ 10

電動工具 Clarke 6480300のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 6480300 20 ページ。 Electric impact wrench

MAINTENANCE

CLEANING

• Always inspect the tool before use, and ensure it is in top condition.

• Ensure all air vents are clear, (use compressed air to clean the

machine if possible).

GENERAL MAINTENANCE

• Ensure all nuts, bolts and screws remain tight to ensure the machine

is in safe working condition.

• Refer to your CLARKE dealer if internal maintenance is required.

• Check the power cable to ensure it is sound and free from cracks,

bare wires etc. avoid using solvents when cleaning plastic parts,

most plastics are susceptible to damage from the various types of

commercial solvents.

• All bearings etc, in this tool are lubricated with a sufficient amount

of high grade lubricant for the tools lifetime under normal operat-

ing conditions, therefore no further lubrication is required.

REPLACING THE CARBON BRUSHES

Remove and inspect the carbon

brushes after periods of extended use.

Replace them when they eventually

wear down. The brushes should be kept

clean and free to slide up and down in

the holders. Both brushes should be

replaced at the same time as a pair.

Only use identical brushes from your

Clarke dealer.

Use a screwdriver to remove the brush

holder covers from the machine body.

Draw out the worn brushes and insert

new ones before replacing the brush

holder caps.