- ページ 15
電動工具 Clarke 6500005のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 6500005 19 ページ。 Mortising machine
ページを印刷する
•
Do not have the slot against the blind end of the mortise, as the chips will
not be able to clear from the chisel. This will cause overheating and possible
breakage to the chisel or bit.
•
When cutting deep mortises, make the cut in several stages of approximately
25mm each, to allow chips to clear.
•
When performing a through mortise, a piece of wood should be placed between
the workpiece and the table. This prevents the wood from splintering when breaking
through the bottom of the mortise and also prevents damage to the table.
•
Always switch the mortising machine off after use. Never leave the machine
running unattended.
MAINTENANCE
For your own safety, turn OFF power and disconnect tool from power
The machine is maintenance free except for periodically cleaning away any dust
accumulation and the application a light coat of oil to all non- painted surfaces,
particularly the two columns.
All of the bearings are packed with grease at the factory and require no further
lubrication.
source before performing any maintenance.
WARNING:
15