ページを印刷する
Laminator
Safety advice and maintenance
-
The device should only be connected to a properly installed 120 V power point.
Any adapter or extension cable must be easily accessible so that it can be
detached from the mains if necessary.
-
Never insert any other objects other than laminating pouches that are intended
for this device, particularly metallic objects, into the pouch insertion slots.
-
Keep away from children.
-
Protect the device from moisture. The location of use must also be dry. Damp
documents should not be laminated. In the case of emergency, always pull the
plug out from the mains.
-
The product is not designed for commercial use.
-
The device generates heat when laminating. Strong sunshine or indoor heating
can exacerbate this situation and can cause the device to become faulty. In
such cases, you should also pull the plug out from the mains immediately.
-
The device has ventilation slots. These should not be covered up with other
objects such as magazines, cloths, etc.
-
After use, switch the device off, and then always pull the plug out from the
mains.
-
The device automatically switches off if it overheats.
-
Only laminate at room temperatures (approx. 50–77°F).
-
The device should never be connected if the cable is damaged.
-
Plastic bags can present a danger. To avoid any danger of suffocation, keep
the bag away from babies and children.
-
Please clean this machine only with a damp cloth.
Meaning of the warning symbols
Caution!
AFTER SALES SUPPORT
1 877-386-8264
Read the instructions!
Not for disposal
with domestic
waste!
www.monolith-support.com
MODEL: OL 215 PRODUCT CODE: 91816 03/15
User Guide
9