- ページ 6

電動工具 Clarke 7614020のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke 7614020 17 ページ。 10 tonne hydraulic bench press

6. Attach the pump assembly to the

frame using the fixing bolts and

washers. Fit one bolt first to bear

the weight and use the

adjustment provided by the

upper bolt.

• The pump can be installed on

either side of the frame but will

usually be assembled for a right-

handed press operator.

7. Screw the pump handle into the

pump actuating lever.

8. Unscrew the air bleed valve and

check that the pump is filled with

hydraulic oil up to a visible level.

• If empty, the total capacity is 630ml.

9. If obtained, bolt the mandrel

storage bracket to the side of the

frame using the bolts supplied.

10. Store the mandrels (if obtained)

including the adaptor, in their

positions on the bracket.

11. Insert the bed support pins into

the holes in the columns at the

required position. Then set the

bed frame in position on the pins.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]