- ページ 14

シュレッダー ALDI MA 501-17のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。ALDI MA 501-17 19 ページ。 Strip cut paper shredder

Operation

Short-term operation:

• The shredder is suitable only for short-term operation and not for

• The shredder motor switches off automatically if it overheats.

Placing on a waste bin

Idealy, use a round waste bin with a diameter of between 27.5 cm and 37.5 cm.

To ensure proper operation, place the paper shredder with both hands on the ring

surface or the edge of the waste bin.

You can adapt the paper shredder to ensure that it fits well on the waste bin.

Situation 1:

1. If the inner diameter of the waste bin is around 27.5 cm, you can directly put the

paper shredder on the waste bin without using the extendable rail

2. Ensure that the shredder is seated firmly on the waste bin (see fig. B).

3. Connect the power plug

conductor (AC 220–240 V; 50 Hz = house connection).

Situation 2:

1. If the inner diameter of the waste bin is larger than 27.5 cm, pull off the

extendable rail

waste bin with both hands.

2. Ensure that the shredder is seated firmly on the waste bin (see fig. C).

3. Connect the power plug

conductor (AC 220–240 V; 50 Hz = house connection).

You can shred your paper with the Auto setting.

1. Place the slide switch

The LED ready indicator

use.

2. Feed the paper through the feed-in slot for paper

Make sure that you push in the paper straight and centred (see fig. D).

If the slide switch is at AUTO, the paper shredder switches off automatically as

soon as the paper has been shredded.

continuous use. After continuous operation of a maximum of

1 minute, let the shredder rest for 30 minutes, to prevent

overheating of the device.

to a properly installed socket with a protective

to a suitable length and then place the paper shredder on the

to a properly installed socket with a protective

at the AUTO position.

comes on green and the paper shredder is ready for

into the cutters.