- ページ 4

電動工具 Clarke CCT48のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke CCT48 13 ページ。 Cordless tacker 6485070

16. Use outdoor extension leads. - When tool is used outdoors, use only extension cords

intended for outdoor use.

17. Stay alert. - Watch what you are doing. Use common sense. Do not operate tool

when you are tired.

18. Check damaged parts. - A guard or other part that is damaged should be properly

repaired or replaced by an authorized service centre unless otherwise indicated in

this instruction manual. Have defective parts replaced by an authorised service

facility.

19. Warning. - The use of any accessory or attachment, other than those recommended

in this instruction manual, may present a risk of personal injury.

20. Have your tool repaired by a qualified person. - This electric tool is in accordance

with the relevant safety requirements. Repairs should only be carried out by qualified

persons using original spare parts, otherwise this may result in considerable danger to

the user.

1. Ensure the trigger switch is not being depressed before inserting battery pack.

2. Recharge only with the charger specified by the manufacturer. A charger that is

suitable for one type of battery pack may create a risk of fire when used with

another.

3. When battery pack is not in use, keep it away from other metal objects like paper

clips, coins, keys, nails, screws, or other small metal objects that can make a

connection from one terminal to another. Shorting to battery terminals together may

cause burns or a fire.

4. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If

contact accidentally occurs, flush with water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the battery may cause irritation or burns.

5. If the supply cord on the charger is damaged, it must be replaced by an assembly

available from the manufacturer.

MACHINE SPECIFIC

1. Secure the workpiece. A workpiece held with clamping devices or in a vice is held

more secure than by hand.

2. Before any work on the machine itself (e.g. maintenance) as well as during transport

and storage, remove the battery from the power tool. There is danger of injury when

unintentionally actuating the trigger switch.

3. Do not open the battery. Danger of short-circuit.

4. Protect the battery against heat, e.g., also against continuous sun irradiation and

fire. There is danger of explosion.

5. Do not short-circuit the battery. There is danger of explosion.

6. Keep your fingers away from the tacker head. There is danger of injury when

unintentionally actuating the trigger switch.

7. Never point the machine at persons or animals. Staples or nails shot from a short

distance can cause considerable injuries.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]