- ページ 4
電動工具 Clarke CDP10BのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke CDP10B 19 ページ。 12 speed drill press
ページを印刷する
GENERAL SAFETY RULES FOR OPERATING MACHINERY
As with all machinery, there are certain hazards involved with their operation and use.
Exercising respect and caution will considerably lessen the risk of personal injury. However, if
normal safety precautions are overlooked or ignored, personal injury to the operator or
•
•
DON'T FORCE THE MACHINE.
It will do a better and
safer job at the rate for
which it was designed.
EARTH ALL MACHINES. If the
machine is equipped with
three-pin plug, it should be
plugged into a three-pin electrical
socket. Never remove the earth pin.
damage to property, may result.
DISCONNECT the
MACHINE from the
power supply
before servicing,
making adjustments
or when changing
accessories such as
drills, vices etc.
•
AVOID DANGEROUS
ENVIRONMENTS
Don't use power machines in
damp or wet locations or
expose them to rain.
Keep your work area well
illuminated.
DO NOT USE in explosive
atmosphere
(around paint,
flammable liquids
etc.).
WARNING:
•
KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
•
DON'T OVERREACH.
Keep your proper footing and bal-
ance at all times. For best
footing, wear rubber soled
footwear. Keep floor clear
of oil, scrap wood, etc.
ENSURE THE
•
WORKPIECE IS
COMPLETELY
SECURE before
switching ON.
NEVER hold
a workpiece
by hand
alone.
•
ALWAYS WEAR SAFETY
GOGGLES,
manufactured to the
latest European Safety
Standards. Also use face
or dust mask if cutting
operation is dusty.
Everyday eye glasses do
not have impact
resistant lenses, they are
NOT safety glasses.
4