- ページ 8

電動工具 Clarke CPS125のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke CPS125 17 ページ。 Metal shears
Clarke CPS125 にも：クイック・スタート・マニュアル (2 ページ)

FITTING THE DUST EXTRACTION ADAPTER OR FILTER CANISTER

Dust extraction equipment (not

supplied), can be used with your

sander by connecting a suitable

hose to the outlet port in place of the

dust filter canister.

1. Attach the dust extraction

adaptor by pushing it onto the

rear of the sander and locking in

place with a half twist.

NOTE: The user should still wear a

dust mask to prevent the inhalation of dust.

2. Alternatively, fit the filter canister

onto the rear of the sander and

lock in place with a half twist.

NOTE: Due to the nature of the

sander, some of the dust

produced will be forced into

the surrounding atmosphere

and will not be collected.

FITTING THE BASEPLATE AND SANDING PADS

1. Using the hex key supplied,

remove the 4 x bolts and install

the baseplate of your choice.

2. Between the baseplate and the

sander is a spacer disc. Fit the disc

into place, noting that there is a

small peg which aligns with a

corresponding hole in the sander.

3. Fit the new baseplate, resting

each of the four feet into the

corresponding socket.

4. Re-tighten the 4 x bolts securely.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]