- ページ 3

電動工具 Clarke CRT 40のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Clarke CRT 40 13 ページ。 40-piece rotary tool kit
Clarke CRT 40 にも：ユーザーマニュアル (6 ページ)

PACKAGE CONTENTS

• ALWAYS keep the power cable away from the moving parts of the rotary

tool.

• ALWAYS switch off the tool and allow it to stop fully before putting it down.

• In the event of power failure or disconnection of supply for whatever

reason, when the tool is in operation...ALWAYS SWITCH OFF the tool before

putting it down, then disconnect it from the mains supply.

• ALWAYS ensure the accessories used are rated for rotation at the

maximum speed of the tool.

• NEVER attach an assembly wrench to your rotary tool with a piece of

string or anything similar.

• NEVER press the drive shaft locking button when the rotary tool is

operating.

• ALWAYS ensure that the mandrel diameter is the same as the collet

diameter.

• ALWAYS use a clamping device for securing the work piece. Keep your

hands away from the work piece.

• ALWAYS wear safety goggles, manufactured to the latest European Safety

Standards. Everyday eyeglasses do not have impact resistant lenses, they

are not safety glasses.

• NEVER force the tool, only light pressure is required to perform a task.

• NEVER overtighten the screw when mounting a grinding disc or cutting

disc onto its mandrel.

• NEVER allow children to operate this tool.

• IF the tool begins to vibrate during operation, switch OFF immediately and

investigate the cause.

The package contains:

Rotary Tool

Flexible Drive

Tool Stand Complete

Chuck spanner

Accessories/consumables

Case