ページを印刷する
OVERVIEW
ASSEMBLY
Insert the chain holder assembly into
the base as shown and secure from
below using the Locking Wheel
supplied.
• Make sure the pointer is
positioned pointing forwards
(away from the grinding wheel).
MOUNTING THE SHARPENER
1. Place the base on a solid, level
surface, e.g. a workbench.
2. Mount the chainsaw sharpener
using the mounting holes on the
base (bolts not supplied).
• The sharpener must overhang
the workbench to allow access
to the locking wheel.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7