ページを印刷するEvaluate, then set precisely the product distance several times before "inking up" the printer
and printing messages ! We strongly recommend fitting product guide rails.
Install the controller in such a way that it is not at a wire distance superior to 1,5m from
the TC print-head (J-Series controller).
Don't hesitate to contact your distributor in case you have any questions regarding the
position of the printer.
2.1.2
Installing the system along the conveyor
Once the correct position of the printer is theoretically determined, take the S062 square
out of the box (Fig. 9) and screw it in the desired position along the conveyor onto a stable
independent floor-stand. Screw the TC print-head to S062, using the 4 M5 holes under the
print-head enclosure (see also packing list). See Fig. 10.
TC series print-heads Operator Manual
Design • Print • Trace
Fig. 8: Maximum printing distance : 3mm
07/07/2011
4