- ページ 6
冷蔵庫 Zanussi ZBB27650SAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZBB27650SA 20 ページ。
ページを印刷する1. Press the Mode button until the corre-
sponding icon appears.
The Intensive Cooling indicator flashes.
2. Press the OK button to confirm.
The Intensive Cooling indicator is shown.
The Intensive Cooling function shuts off auto-
matically after approximately 6 hours.
To switch off the function before its automatic
end:
1. Press the Mode button until the Intensive
Cooling indicator flashes.
2. Press the OK button to confirm.
3. The Intensive Cooling indicator goes off.
Important! The function switches off by select-
ing a different fridge set temperature.
Holiday function
This function allows you to keep the refrigerator
closed and empty during a long holiday period
without the formation of a bad smell.
Important! The fridge compartment must be
empty with holiday function on.
To switch on the function:
1. Press the Mode button until the corre-
sponding icon appears.
The Holiday indicator flashes.
The fridge temperature indicator shows the
set temperature.
2. Press the OK button to confirm.
The Holiday indicator is shown.
To switch off the function:
1. Press the Mode button until the Holiday in-
dicator flashes.
2. Press the OK button to confirm.
3. The Holiday indicator goes off.
Important! The function switches off by select-
ing a different fridge set temperature.
Fast Freeze function
To switch on the function:
1. Press the Mode button until the corre-
sponding icon appears.
6
The Fast Freeze indicator flashes.
2. Press the OK button to confirm.
The Fast Freeze indicator is shown.
This function stops automatically after 52 hours.
To switch off the function before its automatic
end:
1. Press the Mode button until the Fast Freeze
indicator flashes.
2. Press the OK button to confirm.
3. The Fast Freeze indicator goes off.
Important! The function switches off by select-
ing a different freezer set temperature.
High temperature alarm
An increase in the temperature in the freezer
compartment (for example due to an earlier
power failure) is indicated by:
• flashing the alarm and freezer temperature in-
dicators
• sounding of buzzer.
To reset the alarm:
1. Press any button.
2. The buzzer switches off.
3. The freezer temperature indicator shows
the highest temperature reached for a few
seconds. Then shows again the set temper-
ature.
4. The alarm indicator continue to flash until
the normal conditions are restored.
When the alarm has returned the alarm indicator
goes off.
Door open alarm
An acoustic alarm will sound if the door is left
open for a few minutes. The door open alarm
conditions are indicated by:
• flashing Alarm indicator
• acoustic buzzer
When normal conditions are restored (door
closed), the alarm will stop.
During the alarm, the buzzer can be switched off
by pressing any button.
www.zanussi.com