- ページ 16

ページを印刷する

Quick Reference Guide (customer copy)

Sending commands to your vehicle

WARNING! Due to a unique encrypted door lock synchronization system in this vehicle, the

factory locking system and aftermarket locking system can become desynchronized.

To avoid any issues, we highly recommend using the OEM remote or door handle to lock and

unlock the vehicle. Failure to do so may result in needing to hold the OEM remote up to the

Push-To-Start button to start the vehicle.

For a smooth experience, we highly recommend using a 1-button remote (solely for remote

start purposes) when an aftermarket remote or SmartStart is desired for additional range.

If applicable, you can also start the engine remotely by pressing the Lock button 3 times

quickly on your factory remote.

Remote Start Limitations

To remote start the vehicle, all doors must be closed and locked. Hybrid vehicles must also be

unplugged from the charger.

Vehicle takeover with Get In and Go

Close the vehicle doors, hood and trunk, then press

the Remote Start button on the transmitter to start the

vehicle.*

Unlock the vehicle with the factory remote or the button

on the door handle.

Complete the following steps within 45 seconds or the vehicle will shut down.

Enter the vehicle, while making sure the factory remote is

inside with you, then close the driver door.

Depress the brake pedal for a minimum of 3 seconds then

put the car in gear and drive off.

* Icon and remote appearance may differ depending on the model purchased.

403.TL17 1.02 2022 Toyota Corolla Cross (Smart Key)

Get In and Go

Get In and Go is designed to provide users with easy takeover when entering their Push-to-

Start (PTS) equipped vehicle, once it has been remote started.

Typically, users would have to remote start their vehicle, then get inside and press the PTS

button to perform a takeover. There is therefore a physical action required to drive away. With

Get In and Go, you simply remote start the vehicle, unlock the doors, get in and go... All that's

left to do is put the gear in drive and drive off.

Pit stop/idle mode

Stop the vehicle in a safe parking spot and put the gear

in Park (P).

Press the Remote Start button on the transmitter.*

The parking lights will flash once to indicate the vehicle is

now in Pit Stop Mode.

Exit the vehicle with the factory remote in hand (it is safe

to leave the engine running).

Notes: We recommend that you always lock the doors of

Press Remote

your vehicle when leaving it unattended.

Start button*

* Icon and remote appearance may differ depending on the model purchased.

Remote Start Ready (RSR)

Unlock the

vehicle

14:36

3x OEM Lock Remote Start Activation

Enter vehicle

with remote

This solution includes the option to remote start your vehicle by pressing the Lock button

Ready to

3 times consecutively. If your vehicle allows the OEM remote to remain active while the

drive off

engine is running, you may shut down your remote starter by pressing the Lock button 3

times once more.

Note: The range offered by OEM remotes is limited and typically requires you to be within

eyesight of the vehicle to control it.

14:36

Remote Start Ready (RSR) is a function that enables the interface module

to remote start the vehicle completely on its own. Consequently, there is

no need for an aftermarket or an OEM remote starter in order to start the

vehicle from a distance.

Put

gear in

Park

Parking lights flash x1

Press Remote

Start button*

14:36

Exit vehicle

with remote