- ページ 6

冷蔵庫 Zanussi ZFD19/4のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi ZFD19/4 11 ページ。 Fridge-freezer zfd 19/4

Door reversibility

Before carrying out any work on the appliance,

unplug it from the power socket.

Remove the upper hinge (Fig. 3) and slide the top

door off the middle hinge.

Remove the middle hinge, turn it through 180 and

reﬁt it on the opposite side (Fig. 3a) after having

removed the plugs which mask the holes. The plugs

must be reﬁtted in the holes left open on the opposite

side.

Reﬁt the top door and the top hinge. Unscrew the left-

hand levelling foot, which will be reﬁtted on the

opposite side. Unscrew the right-hand levelling foot

(H), the corresponding hinge (I) and the stop (L) and

reﬁt all these on the left-hand side (Fig. 3b).

Reverse the handles after having removed the clip-in

screw covers. The unused holes are masked with

plastic plugs which should be removed and reﬁtted in

the holes left open.

Attention

After completion of the door reversibility operation,

verify that the door gasket is adherent to the cabinet.

If the ambient temperature is cold (i.e. in Winter), the

gasket may not ﬁt perfectly to the cabinet. In that

case, wait for the natural ﬁtting of the gasket or

accelerate this process by heating up the part involved

with a normal hairdrier.

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply.

Voltage can vary by 6% of the rated voltage.

For operation with different voltages, a suitably sized

auto-transformer must be used.

The technical data is indicated in the rating plate on the left side inside the appliance.

TECHNICAL SPECIFICATION

D185

D045

D537

D336

Fig. 3

Fig. 3a

Fig. 3b

Fig. 3c