- ページ 6

冷蔵庫 Zanussi ZI 5165のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi ZI 5165 9 ページ。
Zanussi ZI 5165 にも：取扱説明書 (9 ページ)

Position the runners (H) at the top and bottom of

the inside of the kitchen unit as shown in Fig. 7

and mark the position of the external holes.

After preparing the holes, screw the runners to

the kitchen unit door using 3.5x16 mm screws.

Open both the appliance door and that of the

kitchen unit to approx. 90 .

Place the little plates over the runners. Hold the

doors of the appliance and the unit together and

mark the holes.

Remove the little plates and make the holes with

a diam. of 2 mm. Replace the little plates over

the runners and screw in the screws provided

(3.5x16 mm).

For the alignment of the kitchen unit door, if

necessary, use the clearance size of the slotted

holes.

At the end of the procedure, check that the doors

of the appliance and the kitchen unit open

properly.

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply.

Voltage can vary by 6% of the rated voltage.

For operation with different voltages, a suitably

sized auto-transformer must be used.

The technical data is indicated in the rating plate on the left side inside the appliance.

TECHNICAL SPECIFICATION

D094

8mm

PR34

PR35

Fig. 7

Fig. 8

Fig. 9