- ページ 8
冷蔵庫 Zanussi ZI 9225 AのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi ZI 9225 A 12 ページ。 Zanussi refrigerator instruction booklet
Zanussi ZI 9225 A にも： 取扱説明書 (16 ページ)
ページを印刷するElectrical connection
Before plugging in, ensure that the voltage and
frequency shown on the serial number plate
correspond to your domestic power supply.
Voltage can vary by ±6% of the rated voltage.
For operation with different voltages, a suitably sized
auto-transformer must be used.
Important
The appliance must be earthed.
The power supply cable plug is provided with a
contact for this purpose.
If the domestic power supply socket is not
earthed. connect the appliance to a separate
earth in compliance with current regulations,
consulting a specialist technician.
The
Manufacturer
responsibility
precautions are not observed.
Building-in
Dimensions of the recess
Height of housing (1) 1225 mm
Depth of housing (2)
Width of housing (3)
PR0
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth
50 mm
Width
540 mm
40
declines
if
the
above
550 mm
560 mm
3
1
2
This appliance complies with the following E.E.C.
Directives:
- 87/308 EEC of 2/6/87 relative to radio
interference suppression.
- 73/23 EEC of 19.2.73 (Low Voltage
Directive)
and subsequent modifications.
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
Attention!
It must be possible to disconnect the appliance
from the mains power supply; the plug must
therefore be easily accessible after installation.
all
safety
1. Slide the appliance into the recess, pushing it
against the wall on the handle side.
2. Apply joint the sealing strip as shown in figure.
D022
D132
1
2