- ページ 10

電動工具 Clarke ZX-R Pro SeriesのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Clarke ZX-R Pro Series 17 ページ。 20v cordless multi function tool
Clarke ZX-R Pro Series にも： 取扱説明書 (8 ページ), 取扱説明書 (9 ページ), 取扱説明書 (13 ページ), 取扱説明書 (17 ページ), 取扱説明書 (17 ページ)

ページを印刷する
Clarke ZX-R Pro Series 取扱説明書

THE LASER GUIDE

The laser guide can help with
accurate cutting.
SWITCHING ON/OFF
Use the on/off button to turn the laser
on/off.

BEVEL ADJUSTMENT

1. Loosen the bevel adjustment
locking lever.
2. Adjust the base plate to the
required angle (max 45
• Use the bevel scale as a guide
only; for accurate angles use a
protractor.
3. Tighten the bevel adjustment
locking lever to secure.

MOUNTING AND USING THE PARALLEL GUIDE

MOUNTING
1. Slide the parallel guide into the
base plate as shown.
2. Secure in place using the parallel
guide locking screw.
ADJUSTING
1. Loosen the parallel guide locking
screw.
2. Adjust the parallel guide to the
required length.
• There is a scale on the parallel guide that can be used to give an
approximate guide. Always double check using an accurate ruler.
3. Tighten the parallel guide locking screw to secure the parallel guide in
position.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
o
)
10