- ページ 16
オーブン Zanussi ZOB140XのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZOB140X 21 ページ。
Zanussi ZOB140X にも： ユーザーマニュアル (20 ページ), ユーザーマニュアル (20 ページ)
ページを印刷する
When the cleaning is completed, install the glass
panel and the oven door.
When installed correctly the door trim clicks.
Make sure that you install the internal glass panel in
the seats correctly.
REPLACING THE LAMP
WARNING! Risk of electric shock.
The lamp can be hot.
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
Steam and condensation settle
on the food and in the cavity of
the oven.
SERVICE DATA
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
Model (MOD.)
16
A
Possible cause
The oven is deactivated.
The fuse is blown.
The lamp is defective.
You left the dish in the oven for
too long.
We recommend that you write the data here:
1. Turn off the oven.
Wait until the oven is cooled down.
2. Disconnect the oven from the mains.
3. Put a cloth on the bottom of the cavity.
The back lamp
1. Turn the lamp glass cover to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C heat-
resistant lamp.
4. Install the glass cover.
Activate the oven.
Make sure that the fuse is the
cause of the malfunction. If the
fuse is blown again and again,
contact a qualified electrician.
Replace the lamp.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
the oven cavity. Do not remove the rating plate from
the oven cavity.
.........................................
Remedy