- ページ 27

オーブン Zanussi ZOCND7K1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZOCND7K1 37 ページ。
Zanussi ZOCND7K1 にも：ユーザーマニュアル (33 ページ)

ページを印刷する

Accessories

HOW TO CLEAN: CAVITY EMBOSSMENT

Clean the cavity embossment to remove limestone

residue after cooking with steam.

Step 1

Pour: 250 ml of white vinegar

into the cavity embossment.

Use maximum 6% vinegar

without any additives.

For the function: True Fan Cooking PLUS clean the oven for every 5 - 10 cooking cycles.

HOW TO REMOVE: SHELF SUPPORTS /

CATALYTIC PANELS

Remove the shelf supports / catalytic panels to

clean the oven.

Step 1

Turn off the oven and wait until it

is cold.

Step 2

Pull the front of the shelf support

away from the side wall. Hold

the rear of the shelf support and

catalytic panel in place. The cat-

alytic panels are not attached to

the oven walls. They can fall out

when you remove the shelf sup-

ports.

Step 3

Pull the rear end of the shelf

support away from the side wall

and remove it.

Step 4

Install the shelf supports in the

opposite sequence.

HOW TO USE: CATALYTIC CLEANING

There are catalytic panels in the cavity. Catalytic

panels absorb fat during catalysis.

Clean all accessories after each use and let them dry. Use a soft cloth with warm

water and a mild detergent. Do not clean the accessories in a dishwasher.

Do not clean the non-stick accessories using abrasive cleaner or sharp-edged ob-

jects.

Let the vinegar dissolve the

limestone residue at the ambi-

ent temperature for 30 mi-

nutes.

Step 2

Spots or discolouration of the catalytic coating

have no effect on the cleaning.

Step 3

Clean the cavity with warm wa-

ter and a soft cloth.