- ページ 22

オーブン Zanussi ZOHCX3W2のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZOHCX3W2 28 ページ。
Zanussi ZOHCX3W2 にも：ユーザーマニュアル (24 ページ)

Step 5

Hold the door trim (B) on the top edge of the

door at the two sides and push inwards to re‐

lease the clip seal.

Step 6

Pull the door trim to the front to remove it.

Step 7

Hold the door glass panel by its top edge

and carefully pull it out. Make sure the glass

slides out of the supports completely.

Step 8

Clean the glass panels with water and soap.

Dry the glass panels carefully. Do not clean

the glass panels in the dishwasher.

Step 9

After cleaning, install the glass panel and the

oven door.

The screen-printing zone must face the inner side of

the door. Make sure that after the installation the sur‐

face of the glass panel frame on the screen-printing

zones is not rough when you touch it.

When installed correctly the door trim clicks.

Make sure that you install the internal glass panel in

the seats correctly.

12.4 How to replace: Lamp

WARNING!

Risk of electric shock.

The lamp can be hot.

Step 1

Turn off the oven. Wait until the

oven is cold.

ENGLISH

Always hold the halogen lamp with a cloth to

prevent grease residue from burning on the

lamp.

Before you replace the lamp:

Step 2

Disconnect the oven from the

mains.

Put a cloth on the bottom of the cav‐

Step 3

ity.