- ページ 7
オーブン Zanussi ZOP38903XDのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZOP38903XD 28 ページ。 Product manaul
Zanussi ZOP38903XD にも： ユーザーマニュアル (24 ページ)
ページを印刷する3. Set the function
temperature.
4. Let the appliance operate for 15 minutes.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
Daily use
WARNING!
Refer to Safety chapters.
Display
A
Buttons
Button
On / off
Selection
Fast Heat Up
Pyrolysis
Minus, plus
/
Clock
Setting an oven function
When you set an oven function, the
temperature symbol
symbol shows that the temperature
in the appliance increases.
When the appliance is at the set
temperature, an acoustic signal
sounds and the temperature symbol
stops flashing.
1. Press
to activate the appliance.
www.zanussi.com
and set the maximum
B
C
Function
flashes. The
normal. Make sure that the airflow in the room is
sufficient.
A. Oven function
B. Temperature
C. Time
Description
To activate or deactivate the oven.
To set an oven function.
To activate the Fast Heat Up function.
To start the pyrolytic cleaning.
To set the time and temperature.
To set a clock function.
2. Press
again and again until the symbol
for the necessary oven function appears on
the display.
The display shows the default temperature. If
you do not change the temperature in
approximately five seconds, the appliance starts
to operate.
3. To change the temperature, press
Changing the temperature
1. Press the button
or
.
.
7