- ページ 14

洗濯機 Zanussi FA1032のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi FA1032 21 ページ。 Washing machine fa 1023
Zanussi FA1032 にも：取扱説明書 (18 ページ)

Operating sequence

Before washing your first load of laundry, we

recommend that you run a cotton cycle at 60°C, with

the machine empty, in order to remove any

manufacturing residue from the drum and tub.

Pour half a measure of detergent into the main wash

compartment and start up the machine.

1. Place the laundry in the drum

Open the door.

Place the laundry in the drum, one item at a time,

shaking them out as much as possible.

Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops. Measure

out the amount of detergent recommended by the

manufacturer in a graduated cup and pour it into the

main wash compartment

If you wish to carry out the prewash, pour detergent

into the appropriate compartment marked

3. Measure out the additives

If required, pour fabric softener into the compartment

marked

, without exceeding the «MAX» mark.

R0070

R0071

4. Select the temperature

Turn the dial to the required setting.

R0032S

5. Select the option push button/s

6. Select the programme and start

the machine

Turn the programme selector dial clockwise to the

required programme.

Before pulling the On/off programme selector check if:

• The door is properly closed.

• The appliance is plugged in.

• The water supply tap is turned on.

• The diaphragm lid is correctly screwed into place.

• The drain hose is adequately positioned.

Pull the program dial up to you till it klicks.

The pilot light comes on and the program will begin.

R0033

R0033 B