- ページ 12
洗濯機 Zanussi FAE1025VのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi FAE1025V 27 ページ。 Zanussi washing machine
Zanussi FAE1025V にも： オーナーズマニュアル (48 ページ), ユーザーマニュアル (4 ページ)
ページを印刷する
8. Spin speed selector dial,
SPIN or
RINSE HOLD option
Model FA 1026
This dial allows the reduction of the final and the
intermediate spin speed or to select
or
RINSE HOLD (no-wrinkle)
options.
The speeds on the dial refer to cotton programmes.
Model FA 1026
Position 1000 r.p.m. corresponds to 900 r.p.m. for
synthetics and 700 for wool and delicates.
Model FA 826
Position 800 r.p.m. corresponds to 700 r.p.m. for
delicates.
•
NO SPIN: by selecting this option all the
spinning phases are turned off. To be used for
extremely delicate items.
•
RINSE HOLD (no-wrinkle): by selecting this
option the water of the last rinse is not drained.
When the programme has finished the light
goes on. Before opening the door the water must be
drained.
To drain the water follow these three steps:
A) Turn the programme selector dial to "
B) Select programmes "Q" (DRAIN) or "R" (SPIN).
• If programme "R" (SPIN) has been selected:
Use the spin speed selector dial to choose the
required speed. If the dial is kept in the same
position as at the beginning, in other words
RINSE HOLD (no-wrinkle) position, the machine
will spin at 400 r.p.m.
C) Press
START/PAUSE button.
NO
Model FA 826
NO SPIN
END
O
".
9. Programme selector dial
The selector dial can be turned either clockwise or
counter-clockwise.
Use this selector dial to select the required
programme.
At the end of each programme the selector dial
must be turned to position "
machine.
ATTENTION!
If the programme selector dial is turned to another
position (programme) when the machine is working,
the lights of the programme progress display start to
flash. The machine will not perform the new selected
programme, but it will continue running on the same
cycle.
12
O
", to switch off the