- ページ 9

洗濯機 Zanussi FE 1024 NのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi FE 1024 N 21 ページ。 Washing machine fe 925n; fe 1024 n

ページを印刷する

132992210.qxd

4/7/03

10:29 AM

• Drain only

- Press the RESET button

the DRAIN light

START/PAUSE button.

Important! If you accidentally press the RESET

button more than once, the programme is

cancelled. To cause the washing machine to

drain the water, select any washing programme

by means of the FABRIC button

RESET three times in order to select the DRAIN

position (only the DRAIN light

lit).

OPTIONS

button

Press this button to select the following options:

• PREWASH

: select this option if you wish your

laundry to be prewashed before the main wash

(not available for wool).

The prewash ends with a short spin in

programmes for cotton and synthetic fabrics,

whereas in the programme for delicate fabrics the

water is only drained.

• SUPER RINSE

with all programmes except the wool

programme. The machine performs 4 rinses

instead of 3. This option is recommended for

people who are allergic to detergents, and in areas

where the water is very soft.

• QUICK WASH

laundry (not for wool).

The washing time will be reduced according to the

type of fabric and the selected temperature.

7 START/PAUSE button

This button has three functions:

• Start: after you have selected the desired

programme and options, press this button to start

the washing machine. The light above the button

will stop flashing and remain lit.

• Pause: when you press this button again, the

programme in progress is interrupted. The light

above the button will start flashing. To restart the

programme, press the button again.

Important! You must set the washing machine to

PAUSE before you make any change in the

programme in progress.

• Draining of water and spinning after the

execution of programmes with the RINSE HOLD

option

Pagina

(Nero/Process Black pellicola)

once, so as to cause

to light up, then press the

, then press

will remain

: this option can be selected

: to be used for lightly soiled

8 SKIP/RESET button

At the end of a programme, you must press this

button once or repeatedly, in order to clear the

contents of the memory; otherwise, the next time

you switch the washing machine on, the audible

warning signals relevant to the end of the previous

cycle will be given.

You can also press the RESET button to exclude

one or several phases of the programme which is

running, as indicated below.

- set the washing machine to PAUSE by

pressingthe START/PAUSE button (the relevant

light will flash);

- press the RESET button once or several

times, until the required phase(s) is(are) cancelled

(the light next to the symbol of the phase(s) will go

out).

Example:

This button allows you also to select special

programmes, such as RINSES, SPIN and DRAIN.

• If the machine is already switched on because it

has just performed a washing programme, proceed

as follows:

- depress RESET once or repeatedly to cancel the

previously performed programme (all the phase

indicator lights must be off);

- select the type of fabric by means of the relevant

button;

- select the special programme:

• RINSES

AND SPIN

Depress RESET once, the pilot light

goes out.

• SPIN

Depress RESET twice, the pilot lights WASH

and RINSES

go out.

•DRAIN

Depress RESET three times, the pilot lights

WASH

, RINSES

In this case, the spin

(at the speed provided

for the selected type of

fabric) will be

performed.

(WASH)

and SPIN

go out.