- ページ 14

洗濯機 Zanussi FE 925NのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi FE 925N 21 ページ。 Washing machine fe 925n; fe 1024 n

Zanussi FE 925N ユーザーマニュアル
132992210.qxd
4/7/03
10:29 AM

Operating sequence

Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the ECO
valve. Then run a cotton cycle at 60°C, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked
3. Measure out the additives
If required, pour fabric softener into the
compartment marked
«MAX» mark.
Pagina
14
(Nero/Process Black pellicola)
.
.
without exceeding the
14
4.Switch the machine on
To switch the machine on, press the ON/OFF button
: the mains-on light comes on.
5. Select the desired programme/
fabric
Press the FABRIC button
select the desired programme/fabric. The relevant
light will light up.
The lights relevant to the phases that form the
programme will light up.
The light of START/PAUSE button
flashing.
6. Select the temperature
Press the TEMPERATURE button
select a temperature value different from the one
proposed by the washing machine.
The relevant light will light up.
repeatedly, in order to
will start
if you wish to