- ページ 23

洗濯機 Zanussi FJ 1033のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi FJ 1033 37 ページ。 Electrolux washing machine instruction booklet
Zanussi FJ 1033 にも：取扱説明書 (36 ページ)

ページを印刷する

MAINTENANCE

Successful washing and

smooth running of your

machine depend on a series

of routine

maintenance

operations which should be

carried out from time to time.

IMPORTANT

You are advised to unplug the

appliance before all cleaning

and maintenance operations

DECALCIFICATION

The water we normally use

contains lime. From time to

time, and more often for hard

water, it is a good idea to use

a water softening powder in

the machine. Do this separate

to any laundry washing, and

according to the softening

powder

manufacturer's

instructions.

This

will

prevent the formation of lime

deposits.

AFTER EACH

WASH

Leave the door open for a

while.

This helps prevent mould and

stagnant smells forming inside

the appliance.

EXTERNAL CLEANING

Use soap and water only

and then dry thoroughly.

CLEANING

THE DRAWER

From time to time the

washing powder and additive

dispenser drawer should be

cleaned.

Remove the drawer and

flush out under a tap.

The upper part of the

additives compartment can

removed

for

easier

cleaning.

CLEANING_

THE DRAWER RECESS

Having

removed

the

drawer, use a small brush to

clean the recess ensuring that

all washing powder residue is

removed from the upper part

of the recess. Replace the

drawer and run the prewash

(P) for a few minutes without

any clothes and then the drain

(N) cycle to clear any residues.

THE DANGERS OF

FREEZING

If the machine is exposed

to temperatures below 0°O;

certain precautions should be

taken.

— Turn off the water taps.

— Select a wash programme

and run for a few seconds.

— Unscrew the inlet hoses.

— Unhook the drain hose

from the rear support and

position the end in a bowl.

Run the draining programme

for a few seconds.

— When you intend to start

the machine up again, make

sure

that

the

room

temperature is above 0°C.