- ページ 5

洗濯機 Zanussi FJE 904のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi FJE 904 23 ページ。 Washing machine fje 904 - fje 1204g

ページを印刷する

1. Something Not Working

132992150•FJE904•gb.qxd

02/04/03

Installation

Unpacking

All transit bolts and packing must be removed

before using the appliance.

You are advised to keep all transit devices so that

they can be refitted if the machine ever has to be

transported again.

Using a spanner unscrew and remove the two rear

bottom screws. Slide out the two plastic pins.

Lay the machine gently on its back, making sure that

the hoses are not squashed.

Remove the polystyrene block from the bottom of the

machine and release the two plastic bags.

Very carefully slide out the left polythene bag,

removing it towards the right and then downwards.

Repeat the operation for the right polythene bag,

removing it towards the left and then upwards.

12:27

Pagina 5

(Nero/Process Black pellicola)

P0001

Remove the polystyrene base.

Set the machine upright and unscrew the remaining

rear screw. Slide out the relevant pin.

Fill all the holes with the plastic plugs supplied with

the instruction booklet.

P0002

Positioning

Install the machine on a flat hard floor.

Make sure that air circulation around the machine is

not impeded by carpets, rugs etc. Check that the

machine does not touch the wall or other kitchen

units.

Carefully level by screwing the adjustable feet in or

out. Never place cardboard, wood or similar

materials under the machine to compensate for any

unevenness in the floor.

P1051

Water inlet

Connect the water inlet hose to a tap with a 3/4"

thread.

The other end of the inlet hose which connects to the

machine can be turned in any direction. Simply

loosen the fitting, rotate the hose and retighten the

fitting, making sure there are no water leaks

P1088

P0021