- ページ 12

洗濯機 Zanussi FL 1089のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi FL 1089 26 ページ。 Washing machine fl 1089; fl 1089alu; fl 1289

ページを印刷する

1. Technical Specifications

• Duration of washing programme in hours

and minutes, after you have selected a

programme.

While the programme is running (after you have

pressed the START/PAUSE button), the displayed

time value decreases by one unit every minute.

• The washing machine has stopped with water in

the tub, at the end of a programme with the

NIGHT WASH (CICLO NOCHE) option: this is

indicated by a static zero.

• The washing machine has completed the

programme: this is indicated by a blinking zero.

At the same time, the door locked light goes out.

The zero will reappear when you switch the

washing machine on, unless the previous

programme has been erased by means of the

RESET (ANULAR) button.

Important!

The first time you use the washing machine,

when you switch it on, it may display a blinking zero and

give an audible warning signal. This is due to the fact

that the washing machine has performed a washing

cycle during the manufacturer's inspection tests, and

this cycle has not been erased after its completion.

• Delay start (Inicio diferido), a time value

indicated in hours and selected by means of the

relevant button.

The delay time is displayed for 3 seconds, then the

duration of the selected programme reappears.

After you have pressed the START/PAUSE button,

the countdown begins, and the delay time value

decreases by one unit every hour.

You can delay the start of the selected programme

by up to 24 hours in one hour intervals.

• An incorrect option selection has been made:

this is indicated by the message Err when a

function incompatible with the current programme

is selected.

The incorrect selection is also indicated by an

audible warning signal.

• An alarm code indicates a fault in the machine

operation (see the relevant chapter on page 48).

10 START/PAUSE button

This button has three functions:

• Start: after you have selected the desired

programme and options, press this button to start

the washing machine. The light above the button

will stop flashing and remain lit.

If you have selected a delay time by means of

button 12, the countdown will begin and will be

shown on the display.

• Pause: when you press this button again, the

programme in progress is interrupted. The light

above the button will start flashing. To restart the

programme, press the button again.

When you PAUSE the cycle, the DOOR LOCKED

light goes out, and it becomes possible to open the

door, provided

• the washing machine is not in the heating phase;

• the level of the water is not high;

• the drum is not turning.

(INICIO/PAUSA)