- ページ 19

カーエレクトロニクス Directed CHRYSLER5のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Directed CHRYSLER5 20 ページ。

ページを印刷する

Quick Reference Guide

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk,

there are 3 possible ways you can send commands to your vehicle, using the:

•

Factory remote.

•

Aftermarket remote.

•

Directed SmartStart application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3

times quickly on your factory remote.

Vehicle takeover with regular key

Close the vehicle doors, hood and trunk, then send

the Remote Start command to start the vehicle.*

Send the Unlock command on the factory or

aftermarket remote.*

Enter the vehicle, while making sure the factory

remote is inside with you.

Insert your key in the ignition barrel and turn it to the

ON position.

Depress the brake pedal, put the car in gear and

drive off.

* Icon and remote appearance may differ depending on the model purchased.

Press Remote

Start button*

Press Unlock on

either remote*

Enter vehicle

with remote

Key OUT

Key IN

START

Ready to

drive off

Pit stop/idle mode

Stop the vehicle in a safe parking spot and put the

gear in Park (P).

Press the Remote Start button on the transmitter.*

The parking lights will flash once to indicate the

vehicle is now in Pit Stop Mode.

It is safe to leave the engine running and exit the

vehicle with the factory remote in hand.

Note: We recommend that you always lock the

doors of your vehicle when leaving it unattended.

14:36

* Icon and remote appearance may differ depending on the model purchased.

List of available commands

14:36

Note that the information below is for many Viper, Clifford, Python, Autostart and

AstroStart models. Icons and commands may differ depending on the model and

options purchased. Refer to your authorized installation center for more specific

14:36

information.

Key IN

Button(s)

Actions

START

Press & hold for 1 second to lock.

Press & hold for 1 second to unlock.

Press & hold for 1 second to remote start.

* Press & hold for 5 seconds to activate the trunk release (optional).

* Icon and remote appearance may differ depending on the model purchased.

Put

gear in

Park

Parking lights flash x1

Press Remote

Start button*

14:36

Exit vehicle

with remote

Directed Digital Solutions CHRYSLER5