- ページ 27

食器洗い機 Zanussi ZDT311のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZDT311 32 ページ。 Zanussi dishwasher user manual
Zanussi ZDT311 にも：ユーザーマニュアル (20 ページ)

ページを印刷する

Drain hose

Connect drain hose to the

sink.

If you use a drain hose extension the total

length should not be longer than 4 metres.

Likewise the internal diameter of the couplings

used for connections to the waste outlet must

be no smaller than the diameter of the hose

provided.

Electrical connection

CAUTION!

Safety standards require the appliance to be

earthed.

Prior to using the appliance for the first time,

ensure that the rated voltage and type of supply

on the rating plate match that of the supply

where the appliance is to be installed.

The fuse rating is also to be found on the rating

plate.

Required height: 30 to 100

cm above bottom of the

dishwasher.

Ensure that the hoses are

not kinked, crushed or en-

tangled.

Always plug the mains plug into a correctly in-

stalled shockproof socket. Multi-way plugs,

connectors and extension cables must not be

used.

This could constitute a fire hazard through over-

heating.

If necessary, have the domestic wiring system

socket replaced. In case that the electrical ca-

ble has to be replaced, contact your local Serv-

ice Force centre.

The plug must be accessible after the appliance

has been installed.

Never unplug the appliance by pulling on the

cable. Always pull the plug.

The manufacturer accepts no liability for failure

to observe the above safety precautions.

When connecting the

drain hose to an under

sink trap spigot, the entire

plastic membrane (A)

must be removed. Fail-

ure to remove all the mem-

brane will result in food

particles building up over

time eventually blocking

the dishwasher drain hose

spigot.