- ページ 12
食器洗い機 Zanussi ZSF2450のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZSF2450 20 ページ。 Product manaul
Zanussi ZSF2450 にも： ユーザーマニュアル (20 ページ), ユーザーマニュアル (20 ページ)
ページを印刷する
2
1
3
1
2
5
Put the filters back. Turn
the microfilter clockwise
to lock it.
Cleaning the spray arm
Regularly examine the spray arm. Remove remaining food
from the holes in the spray arm.
Do these steps to remove and to put the spray arm back:
1
What to do if...
The appliance does not start or stops during operation.
If there is a fault, first try to find a solution to the problem
yourself. If you cannot find a solution to the problem
yourself, contact the Service Force Centre.
12
4
Fully clean the filters be-
low running water.
2
3
External cleaning
Clean the external surfaces of the appliance and control
panel with a damp soft cloth. Only use neutral detergents.
Do not use abrasive products, scouring pads or solvents
(acetone, trichloroethylene etc...).
Frost precautions
Caution! Do not install the appliance where the
temperature is below 0 °C. The manufacturer is not
responsible for damage because of frost.
If not possible, empty the appliance and close the door.
Disconnect the water inlet hose and remove water from
the water inlet hose.
Long periods of non-operation
Do these steps when you do not use the appliance for a
long period:
1. Disconnect the mains plug from the mains socket.
2. Close the water tap.
3. Keep the door open to prevent unpleasant smells.
4. Keep the inner side of the appliance clean (filters es-
pecially).
Caution! Switch off the appliance before you do the
below suggested corrective actions.