- ページ 16
食器洗い機 Zanussi ZSF2450のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZSF2450 20 ページ。 Product manaul
Zanussi ZSF2450 にも： ユーザーマニュアル (20 ページ), ユーザーマニュアル (20 ページ)
ページを印刷する
Drain hose
The appliance has water safety system to prevent
water damage. If there is a malfunction, the drain
pump automatically starts to drain the remaining water
out of the dishwasher.
Warning! Only if the dishwasher is connected to the
mains socket, the water safety system operates
when the dishwasher is off.
Two procedures are possible to install the water drain
hose :
1
2
max. 75cm
Electrical connection
Warning! The manufacturer is not responsible if
you do not follow these safety precautions.
Ground the appliance according to safety precautions.
Make sure that the rated voltage and type of power on the
rating plate agree with the voltage and the power of the
local power supply.
Always use a correctly installed shockproof socket.
Do not use multi-way plugs, connectors and extension
cables. There is a risk of fire.
16
1. Attach the plastic curve supplied at the end of the
hose.
Put the water drain hose in the sink.
2. Connect the water drain hose to the water drain
system.
The hose must be less than 75 cm above the bottom
of the dishwasher to prevent incorrect operation of
appliance.
Do not replace the mains cable yourself. Contact the
Service Force Centre.
Make sure that the mains plug is accessible after
installation.
Do not pull the mains cable to disconnect the appliance.
Always pull the mains plug.
If you connect the water
drain hose to a trap spigot
under the sink, remove the
plastic membrane (A). If
you do not remove the
membrane, remaining
food can cause a blockage
in the drain hose spigot