- ページ 11

食器洗い機 Zanussi ZSFN121W3のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZSFN121W3 25 ページ。
Zanussi ZSFN121W3 にも：ユーザーマニュアル (25 ページ)

ページを印刷する

AirDry is automatically activated with all

programmes other than

The duration of the drying phase and the door

opening time vary depending on the selected

programme and options.

CAUTION! Do not try to close the

appliance door within 2 minutes after

automatic opening. This can cause

damage to the appliance.

If, afterwards, the door is closed for at

least 3 minutes, the running

programme ends.

CAUTION! If children have access to

the appliance, we advise to deactivate

AirDry. The automatic opening of the

door may pose a danger.

BEFORE FIRST USE

1. Make sure that the current level of the

water softener agrees with the hardness

of the water supply. If not, adjust the level

of the water softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any processing

residuals that can still be inside the appliance.

Do not use detergent and do not put dishes in

the baskets.

After starting the programme, the appliance

recharges the resin in the water softener for up to 5

minutes. The washing phase starts only after this

procedure is complete. The procedure is repeated

periodically.

(if applicable).

How to deactivate AirDry

The appliance must be in programme selection

mode.

Make sure that the programme marker on the knob

is set to the on/off position.

1. To enter the user mode, press and hold

the same time turn the knob counterclockwise

until the programme marker indicates the first

programme. Release

and on/off start flashing.

2. Turn the knob counterclockwise until the

programme marker indicates the fourth

programme.

The indicator

shows the current setting:

•

is on = AirDry is activated.

•

is off = AirDry is deactivated.

3. Press

to change the setting.

4. To confirm the setting, keep turning the

programme knob until the programme marker is

back in the on/off position.

THE SALT CONTAINER

CAUTION! Use rough salt designed

for dishwashers only. Fine salt

increases the risk of corrosion.

The salt is used to recharge the resin in the water

softener and to assure good washing results in

daily use.

HOW TO FILL THE SALT CONTAINER

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt container (only for

the first time).

3. Fill the salt container with 1 kg of salt (until it is

full).

. At

when the indicators