- ページ 13

食器洗い機 Zanussi ZSLN1211のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZSLN1211 28 ページ。
Zanussi ZSLN1211 にも：ユーザーマニュアル (21 ページ)

ページを印刷する

CAUTION!

If children have access to the appliance,

it is advised to deactivate AirDry as

opening the door may pose a danger.

How to deactivate the AirDry

Make sure the appliance is in user mode.

1. Press the programme button four times.

The indicator

starts to flash.

8. BEFORE FIRST USE

1. Make sure that the current level of the

water softener agrees with the

hardness of the water supply. If not,

adjust the level of the water softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not put dishes in the

baskets.

After starting the programme, the appliance

recharges the resin in the water softener for

up to 5 minutes. The washing phase starts

only after this procedure is complete. The

procedure is repeated periodically.

8.1 The salt container

CAUTION!

Use rough salt designed for dishwashers

only. Fine salt increases the risk of

corrosion.

The salt is used to recharge the resin in the

water softener and to assure good washing

results in daily use.

8.2 How to fill the salt container

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt container

(only for the first time).

3. Fill the salt container with 1 kg of salt

(until it is full).

2. Wait until the indicator

flash and the remaining programme

indicators are off.

The indicator

shows the current setting:

•

is off = AirDry is off.

•

is on = AirDry is on.

3. Press the programme button to change

the setting.

4. Press the on/off button to confirm the

setting.

4. Carefully shake the funnel by its handle to

get the last granules inside.

5. Remove the salt around the opening of

the salt container.

6. Turn the cap of the salt container

clockwise to close the salt container.

CAUTION!

Water and salt can come out of the salt

container when you fill it. After you fill the

salt container, immediately start a

programme to prevent corrosion.

continues to

ENGLISH