ページを印刷するIf after all these checks, the problem persists, contact
your local Service Force Centre, quoting the model
and serial number. This information can be found on
the rating plate located on the right hand side of the
dishwasher door (see picture).
Service and spare parts
This product should be serviced by an
authorised Service engineer, and only
genuine spare parts should be used.
Under no circumstances should you attempt
to repair the machine yourself.
Repairs carried out by inexperienced
persons may cause injury or serious
malfunctioning. Contact your local Service
Force Centre.
Always insist on genuine spare parts.
Protection against flooding
The machine is fitted with a device in the bottom of the
machine to protect against flooding. The device will
operate if there are any water leaks in the machine,
however it will only operate if the machine is on.
In case of intervention a fault code will appear in the
digital display "AL4". In this case, turn off the water
tap and call the Service Force Centre.
Security system
Inlet hose
The
inlet hose has a high pressure
resistance.
It can sustain pressures up to 6000 kPa (60 bar), 6
times a normal hose.
As a further safeness, the inlet hose is protected with
a sheathing against eventual damages.
In case of breakage of the inner hose, the water that is
in the hose will become blue, this is visible across the
special transparent sheathing.
In this case turn off the water tap and call the Service
Centre.
The
inlet hose is also fitted with a safety
device to prevent inadvertent loosening (see "Water
supply connections").
Prod.No. ........ Ser. No. .........
Mod. ........
RA01
45
RIM10en