ページを印刷する•
Clean the appliance regularly to prevent the
deterioration of the surface material.
•
Deactivate the appliance and let it cool down
before you clean it.
•
Disconnect the appliance from the electrical
supply before maintenance.
•
Do not use water spray and steam to clean the
appliance.
•
Clean the appliance with a moist soft cloth. Only
use neutral detergents. Do not use any abrasive
products, abrasive cleaning pads, solvents or
metal objects.
DISPOSAL
WARNING! Risk of injury or
suffocation.
INSTALLATION
WARNING! Refer to Safety chapters.
BEFORE THE INSTALLATION
Before you install the hob, write down the
information bellow from the rating plate. The rating
plate is on the bottom of the hob.
Serial number ...........................
BUILT-IN HOBS
Only use the built-in hobs after you assemble the
hob into correct built-in units and work surfaces
that align to the standards.
ASSEMBLY
min.
500mm
•
•
•
SERVICE
•
•
CONNECTION CABLE
•
•
min.
50mm
Contact your municipal authority for information
on how to discard the appliance correctly.
Disconnect the appliance from the mains
supply.
Cut off the mains electrical cable close to the
appliance and dispose of it.
To repair the appliance contact an Authorised
Service Centre.
Use original spare parts only.
For a single phase or two phase connection,
use the cable type: H05BB-F or H03V2V2-F
which withstands a temperature of 70°C or
higher.
To replace the damaged mains cable, use the
cable: H05BB-F or H03V2V2-F which
withstands a temperature of 70°C or higher.
R 5mm
+1
490
mm
560
min.
55mm
+1
mm
5