- ページ 6

ホブ Zanussi ZBC 402 B/WのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi ZBC 402 B/W 12 ページ。 Ceramic built-n hobs
Zanussi ZBC 402 B/W にも：取扱説明書 (12 ページ), 操作と組み立ての説明 (12 ページ)

ページを印刷する

Ensure that the electric circuit is capable of carrying the

load of the appliance.

Switch

the electricity supplies at the mains.

A double pole cooker control switch with a suitable

electrical rating should be used to control the electrical

supply to the hob.

The control switch should be easily accessible to the

user on completion of the installation.

The control switch must not break the yellow/green

earth wire at any point.

To wire the hob, carefully place the unit, face downward

on a flat surface with the control area overhanging, to

avoid damage to the controls. Remove the screws

securing the cover to the terminal box, remove the cover

and connect the supply cable via the cable clamp

(Fig.1), to the terminals provided. The supply cable

should be 6mm

or its equivalent.

Connect the earth wire to the terminal marked with the

letter "E" or with the earth symbol or coloured green.

Connect the live wire to the terminal marked with the

letter "L" and coloured brown or red.

Connect the neutral wire to the terminal marked with

the letter "N" and coloured blue or black.

Tighten the terminal screws and the cable clamp,

then refit the terminal plate cover. You must ensure that

the cabinet is stable and level.

This appliance complies with EEC Directive number 76/

889 and amendment 82/499 relating to the suppression

of radio and TV interference.

The rating plate is situated on the underside of the unit

and gives the type and serial number as well as the

model description of the appliance (which should be

quoted in any communication).

The appliance must be connected to a cooker point,

having a double pole isolating switch with a contact

separation of

in all poles.