- ページ 8

ホブ Zanussi ZDG 320 TのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi ZDG 320 T 10 ページ。 Gas hob zdg 320 t

7. Building In

INSTALLATION AND ASSEMBLY

These hobs can be installed in a kitchen unit with an

opening for insertion whose dimensions are shown in Fig.

Carry out the building in of the hob as follows:

•

put the relevant sealings, supplied with the hob, on the

edges of the cut out, taking care that the sealings

meet without overlapping;

•

place the hob in the cut out, taking care of its centring;

•

fix the hob with the relevant screws (Fig. 10). The

traction of the screws is able to trace the sealing, any

excess of which can then be easily removed.

The edge of the hob forms a double labyrinth seal which

provides a total guarantee against infiltration of liquids.

If several 30cm hob are to be installed side by side

into the same cut out, an assembly kit including

a support side bracket and supplementary

sealings is available at our After Sales Centres.

The relevant installation instructions are supplied

within the kit package.

0199

a) sealing

Fig. 9

Fig. 10