- ページ 12

ホブ Zanussi ZGF 786 ICWのPDF 操作および設置マニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZGF 786 ICW 13 ページ。

INSTALLATION AND ASSEMBLY

These hobs can be installed in a kitchen unit with an

opening for insertion whose dimensions are shown in

Fig. 16.

The edge of the cut out must have a minimum distance

from the rear wall of 55 mm.

If there are side walls, or sides of the furniture unit near

the hob, the cut out edges must have a minimum

distance of 150 mm.

Carry out the building in of the hob as follows:

•

put the relevant sealings, supplied with the hob, on

the edges of the cut out: place them exactly on the

front and rear edge and at 50 mm. from the side

edges, as shown in Fig. 17, taking care that the

sealings meet without overlapping;

•

place the hob in the cut out, taking care of its

centring;

•

fix the hob with the relevant screws (Fig. 18). The

traction of the screws is able to trace the sealing, any

excess of which can then be easily removed.

The edge of the hob forms a double labyrinth seal

which provides a total guarantee against infiltration of

liquids.

FO 2038

FO 2039

FO 0199

a) sealing

560

150 min

Fig. 16

Fig. 17

Fig. 18