- ページ 28
ホブ Zanussi ZGG 742 EのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Zanussi ZGG 742 E 40 ページ。 Electronic gas hob
ページを印刷する
Connection
IMPORTANT: This hob must be
installed by a competent person to
the relevant Gas Standards.
Any gas installation must be carried
out by a competent person.
The manufacturer will not accept
liability, should the above instructions
or any of the other safety instructions
incorporated in this book be ignored.
Carry out connection to the gas supply using
a rigid metal pipe with connections
conforming to the rules in force, or with a
flexible s/steel tube conforming to the
relevant rules in force, limited to those
whose max. length is 2 m. If flexible metal
tubes are used, make sure they do not
come into contact with mobile parts or are
crushed. Pay the same attention also when
an oven and top combination is provided for.
The appliance gas inlet connection is 1/2"
cylindrical threaded male.
together without using excessive force.
IMPORTANT: After installation,
always
tightness of all the connections,
using a soapy solution. NEVER
carry out this check with a flame.
28
Screw the parts
check
the
perfect
A) Gas ramp end with nut
B) Washer
C) Elbow