- ページ 13
ホブ Zanussi ZGG62414XAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Zanussi ZGG62414XA 20 ページ。 Product manaul
Zanussi ZGG62414XA にも： ユーザーマニュアル (16 ページ), ユーザーマニュアル (49 ページ)
ページを印刷する
Green and yellow
Blue
Brown
WARNING!
A cut off plug inserted into a 13 amp
socket is a serious shock hazard.
Ensure that the cut off plug is
disposed of safely.
Replacement of the connection cable
The replacement of electric cable
must be carried out exclusively by
the service force centre or by
personnel with similar
competencies, in accordance with
the current regulations.
To replace the connection cable use
only H03V2V2-F T90 or equivalent
type. Make sure that the cable
section is applicable to the voltage
load and the working temperature.
The yellow/green earth wire (B)
must be approximately 2 cm longer
than the live and neutral wire (A).
1. Connect the green and yellow (earth) wire
to the terminal which is marked with the
letter 'E', or the earth symbol
coloured green and yellow.
2. Connect the blue (neutral) wire to the
terminal which is marked with the letter 'N'
or coloured blue.
3. Connect the brown (live) wire to the
terminal which is marked with the letter 'L'. It
must always be connected to the network
phase. There must be no cut or stray
strands of wire present. The cord clamp
must be correctly attached to the outer
sheath.
www.zanussi.com
- Earth
- Neutral
- Live
A
B
, or
Assembly
1.
2.
3.
min. 600 mm
min. 100 mm
min. 55 mm
30 mm
4.
50 mm
min. 650 mm
550 mm
400 mm
13